4 Responses to Refinishing a Gun Stock

1. Brittius says:

   January 22, 2018 at 3:19 pm

   Reblogged this on Brittius and commented:
   It depends… I usually use Watco Dark Danish Oil on the Model-70, and other times, I use pine tar, followed by mineral oil and when the oil is wet, I rub beeswax over the oil to melt the wax and burnish by hand. The low luster buff with a soft dry cloth.

   Reply

2. Pingback: 2AR | Refinishing a Gun Stock | Brittius

3. Pingback: 2AR | Refinishing a Gun Stock |

4. Pingback: Refinishing a Gun Stock – Bob's Opinion